Presser feet for Bernette b38

Reference: 5020601417

Ten-foot accessory set whose official compatibility list names b37 and b38; verify article number 5020601417.

Reference: 5020601537

Decorative presser-foot set documented for the b37 and b38 machines; verify article 5020601537.

Reference: 5020601428

Official six-piece quilting accessory set for the b37 and b38; verify article number 5020601428.

Reference: 5020601350

Official walking foot assigned to accessory group F2 for the b37 and b38; match article number 5020601350.

Reference: 5020601488

Official two-groove piping foot assigned to accessory group F2 for the b37 and b38; match article number 5020601488.

Reference: 5020601359

Official overlock foot C assigned to accessory group F2 for the b37 and b38; match article number 5020601359.

Reference: 5020601409

Official zigzag foot A assigned to accessory group F2 for the b37 and b38; match article number 5020601409.

Reference: 5020601363

Official invisible-zipper foot Z assigned to accessory group F2 for the b37 and b38; match article number 5020601363.

Reference: 5020601365

A snap-on foot for blind hems and edge topstitching. For a discreet hem, adjust the stitch so the needle just catches the fold rather than taking a large bite into the visible fabric.

Reference: 5020601378

The transparent sole keeps the fabric and stitching visible during decorative sewing and appliqué. This snap-on foot helps guide a motif; it does not turn a standard sewing machine into a hoop embroidery machine.

Reference: 5020601382

This snap-on foot provides guides for quarter-inch and eighth-inch patchwork seam allowances. Use the foot edge or its side guide to keep adjoining fabric pieces aligned.

Reference: 5020601357

The non-slip sole helps hold a button while it is sewn in place. This snap-on foot is also listed for suitable rings and hooks; set the stitch width to the actual spacing of the holes.

Reference: 5020601375

The shaped sole changes the way fabric advances to form gathers as you stitch. This snap-on gathering foot carries reference 5020601375, also written 502060.13.75.

Reference: 5020601347

The coated sole reduces friction on materials such as leather, plastic and vinyl. This snap-on foot uses a sliding sole rather than the roller of bernette part 5020601484 for b33/b35.

Reference: 5020601368

This snap-on foot turns the fabric edge twice to form a narrow rolled hem. The fold is secured with a straight stitch. The merchant does not specify a confirmed finished hem width.

Reference: 5011-19

A generic snap-on binding foot for bias tape up to a quarter inch, according to the merchant. It supports straight, zigzag and decorative stitching. Choose variant 5011-19; the genuine 200140009 option is a different offer.