SewMatch
Catalog
MachinesBobbinsPresser feetNeedlesParts by modelFoot controlsDrive beltsEmbroidery hoops
Home/Parts guide/Presser feet for sewing machines

01Buying guide

Presser feet for sewing machines

“Low shank” or “snap-on” alone is not a complete compatibility claim. The machine, holder, opening and intended stitch must work together.

Fit depends on the exact machine model. Use your machine details to compare parts and retailer listings before ordering.

02

What decides whether it fits

  • Attachment group, shank height and holder or adapter
  • Maximum stitch width and needle-opening position
  • Model-specific clearance for walking, quilting and specialty feet

03

What to check before buying

  • Exact model and installed presser-foot holder
  • Foot name plus OEM or accessory catalogue number
  • Needle position, stitch width and any adapter required

From guide to purchase

Turn this guide into a buying check.

This guide explains what matters. Next, choose your machine and compare its part reference with the retailer listing.

  1. 01Learn the fit criteria

    Identify the dimensions, attachment or electrical details that decide whether the part fits.

  2. 02Find your machine

    Open its page to see the part name or reference and the manufacturer source.

  3. 03Match the retailer listing

    Compare model, reference and region before ordering. A similar product name is not enough.

Choose your machine

04Choose your machine

Presser feet for sewing machines

SingerHeavy Duty 4423

Low-shank presser-foot group for Singer Heavy Duty

View the matching part SingerHeavy Duty 4432

Singer Heavy Duty compatible presser-foot group

View the matching part SingerHeavy Duty 4452

Walking and non-stick feet supplied with Singer 4452

View the matching part SingerQuantum Stylist 9960

Included presser feet for Singer 9960

View the matching part BrotherCS7000X

SA125, SA140 and SA129 accessory feet

View the matching part BrotherXR9550

SA125, SA140 and SA129 accessory feet

View the matching part BrotherST371HD

SA140, SA129 and SA125 accessory feet

View the matching part JanomeHD-3000

Janome even-feed foot (5–7 mm low shank)

View the matching part Janome2212

Janome front-loading even-feed foot

View the matching part Janome3160QDC-G

Janome 1/4-inch seam foot (5–7 mm top load)

View the matching part Janome4120QDC-G

Janome 1/4-inch seam foot (5–7 mm top load)

View the matching part

Before you order

What to check before buying

Turn the handwheel slowly after fitting a foot. The needle must clear the opening throughout the selected stitch width before powered sewing.

Fit depends on the exact machine model. Use your machine details to compare parts and retailer listings before ordering.

Choose your machine