130/705 H
SCHMETZ Universal 130/705 H needles
Suitable systemFor household machines that use the 130/705 H system. Choose the size for the fabric and check the manual.
01Troubleshooting guide
Upper thread keeps breaking: what to check
Repeated breaks usually come from a snag, incorrect threading or a damaged needle eye. Do not start by turning tension controls at random.
02
Most likely causes
- The thread catches on the spool cap, notch or a missed guide.
- The needle eye is damaged or too small for the thread.
- Upper tension is excessive because the machine was threaded with the presser foot down.
03Step
Check in this order
- 01Step 1
Remove the thread and inspect its path, the spool edge and the needle plate for a sharp snag.
- 02Step 2
Fit a new needle with an eye large enough for the thread and fabric.
- 03Step 3
Raise the presser foot, set the take-up lever high and rethread every guide.
- 04Step 4
Return upper tension to the manual’s normal range and test slowly with quality thread.
04
What should restore normal sewing
The spool must unwind freely without the thread catching under the cap.
A clean thread path, suitable needle and normal tension should produce an even seam without fraying.
05Useful parts for this symptom
Check the reference before replacing anything
These products match the subject of this guide. Open the compatibility page to confirm your exact machine, then compare the reference on Amazon.
130/705 H SUK
SCHMETZ Jersey 130/705 H SUK needles
Suitable systemMedium ball point for jersey and knitted fabrics. Use only when the manual accepts the 130/705 H system.